Technical data

1.Pressure test pressure:6.0 Mpa

2:Open pressure:A type 0-1.0mpa adjustment; D Type 0.5~2.0Mpa adjustment 

3.Application Area  a.Thermal gasification cream system b. heat recovery system   c. evaporator pressure control d. Condensor pressure control e.Screw compressor oil pressure adjustment f.Any in-put pressure control

4.operating temperature arrangement:-45℃~+150℃ 

5.Working system :valve open while the in -put pressure reached the setting pressure 

6.With manual open function

7.suitable medium:R22,R507,R407C,R404A,R134a,R717 etc refrigerant gas &refrigerant oil.

Notes: 1.During installation, the inlet and outlet of the pressure regulating valve,shall be parallel to   the ground, and the tilt Angle shall not be greater than 15 degrees. 2.The front end of the inlet of the pressure control valve is equipped with a filter with a filtering   precision of 100 mesh to prevent foreign impurities from entering the valve and causing the   death of the piston and the failure of the pressure control valve.